FEATURES
• Over/Under Design
• Powered Drive, Lift, Push/Pull
• Docking Feature at Transfer Locations
• Pendant Controlled
Double Station Die & Mold Carts (2,500+ lbs)
2 X 3,000 lb. Double Station Die/Mold Cart (2785)
FEATURES
● Over/under load decks
● 24VDC 600AH steel case battery
● Power push/pull on each level
● Variable deck heights
● Tiller drive
● On-board battery charger
● Floor mounted docking rail
2 X 6,600 lb. Double Station Die/Mold Cart (2598)
FEATURES
● Self contained DC power unit
● Internal drive with plus / minus 90 degree steering
● Scissor lift
● High capacity roller deck
● Operator ride-on station
● On-board battery charge
2 X 15,000 lb. Double Station Die/Mold Cart (2520)
FEATURES
● Roller deck
● Lift
● Tiller drive
● Fold down lead roller/mold stop
2 X 3,000 lb. Double Station Die/Mold Cart (2332)
FEATURES
● Over/Under Style for Rapid Die Exchange
● Dual Rigid Chain Push/Pull on Each Deck
● Tiller Drive
● Mast Lift
● DC Power & Control
2 X 1,500 lb. Double Station Die/Mold Cart (2295)
FEATURES
● Variable transfer height
● AC powered lift
2 X 2,500 lb. Double Station Die/Mold Cart (2263)
FEATURES
● Self contained DC powered
● Power steering
● Mast lift
● Ball-screw push/pull system
● Drawbridge to span press/cart gap
● Tiller drive
● Docking/retention guide rollers
2 X 8,000 lb. Double Station Die/Mold Cart (1878)
FEATURES
● DC powered
● Free ranging
● Compact design
● Dual push/pull on each level
● Docking/locking device
● Mast type lift
OPTIONS
● Custom load decks and transfer heights
● Operator ride – on configuration
● Pendant or wireless remote control
● Automatic guided control (AGV)
● Powered die stops
● Increased battery and charger
● Powered die hooks
2 X 6,000 lb. Double Station Die/Mold Cart (1760)
PRODUCT DESCRIPTION
Change dies in minutes safely with the Titan 1760. The over/under design provides die pre-staging capabilities. Operators are able to stage the exchange die at the press prior to extracting the die in the press. Upon extracting the die from the press the lift is simply lowered and the exchange die inserted.
FEATURES
● Over/under load decks
● Transfer elevation (lower deck) 10 ½” to 58” raised (dimensions from floor)
● Deck dimensions 70 “ W x 28” D
● 720 AH battery, fully automatic on-board charger, 120 V AC/24 V DC
● Dual Serapid® insert/extract mechanisms, 10 FPM linear speed
● Internal DC drive propulsion
● Pendant controlled
● Hydraulic actuated steering
● 0 – 150 FPM travel speed
● Manual safety die hooks
● Powered docking pin
● Low profile UHMW slides
● Docking guide rollers
OPTIONS
● Custom load decks and transfer heights
● Operator ride – on configuration
● Pendant or wireless remote control
● Automatic guided control (AGV)
● Powered die stops
● Increased battery and charger
● Powered die hooks
2 X 3,000 lb. Double Station Die/Mold Cart (1614)
PRODUCT DESCRIPTION
Change dies in minutes safely with the Titan 1614. The over/under design provides die pre-staging capabilities Operators are able to stage the exchange die at the press prior to extracting the die in the press. Upon extracting the die from the press, the lift is simply lowered and the exchange die inserted.
FEATURES
● Over/under load decks
● Transfer elevation ( lower deck) from 12” to 60” above floor
● Transfer elevation (upper deck) from 38” to 86” above floor
● Maximum die dimensions 51” L – R, 28” F – B 22” H
● 650 AH battery, fully automatic charger on-board 120 V AC/24 V DC
● Dual Serapid® push/pull mechanisms, 10 FPM linear speed
● Tiller type drive unit
● 0 – 150 FPM travel speed
● Manual safety die hooks
● Low profile UHMW die slides
● Docking guide roller
OPTIONS
● Custom load decks and transfer heights
● Operator ride – on configuration
● Pendant or wireless remote control
● Automatic guided control (AGV)
● Powered die stops
● Increased battery and charger capacity
● Die storage systems
● Powered die hooks