Die Shuttles

  1. Home
  2. Quick Die/Mold Change Systems
  3. Die Shuttles

8 x 15,000 lb. ASRS (236863)

SPECIFICATIONS

  • Allows rapid exchange of dies
  • Powered rollers for die transfer in a 2 column wide by 4 cell high die library with transfer elevator
  • 1 touch HMI for quick and efficient exchange of dies
  • Rail mounted die transfer shuttle travels and docks to rigid chain push/pull to complete transfer into the press
  • FUNCTION: safely removes old die from the press to the die library elevator where a new die is staged. The new die is transferred to the shuttle which travels to the press and inserts the new die safely and efficiently while the elevator places the old die safely in the die library
8 x 15,000 lbs. Capacity
See this product in action
Read More

2 x 35,000 lb. Die Shuttle (236421)

SPECIFICATIONS

  • Allows rapid exchange of dies
  • Internal power & rail mounted
  • Walk along lever control
  • Low friction skate rollers
  • Out of sequence prevention feedback
  • Rigid chain push/pull arms
  • Safety bumper stops
  • FUNCTION: safely stages a new die at the press, removes old die, sideshifts, and inserts new die safely and efficiently
2 x 35,000 lbs. Capacity
Download Printable PDF
Read More

2 x 3,300 lb. Mold Shuttle (236986)

SPECIFICATIONS

  • Allows rapid exchange of dies
  • Internal power & rail mounted
  • Wired control pendant
  • Low friction gravity rollers
  • Out of sequence prevention feedback
  • Paired staging rack
  • Push/pull arms
  • FUNCTION: safely stages a new die at the press, removes old die, sideshifts, and inserts new die safely and efficiently
2 x 3,300 lbs. Capacity
Download Printable PDF
Read More

5,000 lb. Quick Die Change Rail Car (215522)

5,000 lb. Capacity

Download Printable PDF

FEATURES

  • Dual operator stations for better tool alignment at press or storage
  • Safely removes tool from the press or storage Powered rollers for tool transfer
  • Pressure mats on riding stations to enable controls
  • Rail-mounted to allow safe access to multiple presses
  • Single operator design
Read More

4x 1500 lb. Die Table (215429)
Download Printable PDFSee This Product In Action

FEATURES

  • 4 stations rated at 15,000 lbs. per station to stage multiple tools for QDC
  • Pneumatic powered for safe reliable transfers
  • Heavy duty rollers give a low friction surface for tool transfer
  • Rigid chain push / pull
  • Easy to use control podium
  • Multiple safety sensors to protect load

4 x 15,000 lbs. Capacity

Read More

2 X 25,000 lb. Die Shuttle (184416)
Request a quote

FEATURES

  • Side by side two position shuttle deck on floor mounted base to allow one pitch of shuttle travel to align either station with press
  • Powered dual rigid chain push/pull system on each load deck
  • Powered die gripper for hands-free die connection mates with
  • Green Valley die brackets
  • Powered die stops at transfer of both stations
  • DRIVE – Pneumatic Drive
  • DECK SURFACE – Inline Gravity Rollers

2x 15,000 lbs. Capacity

See this product in action
Download Printable PDF
Read More
2 X 25,000 LB. DIE Change SHUTTLE (184416)

2 X 25,000 lb. Die Shuttle (194742)
2 X 25,000 LB. DIE Change SHUTTLE (184416)

2x 25,000 lbs. Capacity

Request a quote
Download Printable PDF

FEATURES

• Two position shuttle deck on floor mounted base

• Air powered gearmotor linear drive

• Powered lock pin to retain shuttle deck in either transfer location

• Powered dual rigid chain push/pull system

• Operator control panel & pendant controller on 8’ tether

• Powered die stops at transfer end of both stations

• Extention bridges

Read More

2 X 30,000 lb. Die Shuttle (143276)

FEATURES

● shop air powered controls
● fully guided push/pull rigid chain
● side guides to keep die centered
● folding bolster extensions

2x 10,000 lbs. Capacity

Request a quote
Download Printable PDF
Read More

2 X 15,000 lb. Die Shuttle (2773)

2x 15,000 lbs. Capacity

Download Printable PDF

FEATURES

● air powered rail car
● air powered die transfers
● air powered die grippers
● pneumatic/hydraulic powered bridges
● pneumatic/hydraulic powered shot pin
Read More